The large metal ring that clamps down on the friction disc when the clutch is engaged is called the ________ ________.

In a P-metric tire size designation, the last two digits represent the rim or wheel diameter in what units?

To keep a car body from rolling or leaning excessively in turns or corners, a ________ ________ is used.

A ________ system is based on the principle that liquids in a confined area will not compress.

The initials ASE stand for ________ ________ ________.

A certain manual transmission's drive gear has 12 teeth and the driven gear has 24 teeth. What is the gear ratio?

The relationship of tire height to its width is called its ________ ________.

The ________ spring is the most common type found on front suspension systems.

A brake ________ is a device, usually vacuum-operated, that assists in brake pedal application.

How many ASE tests must be passed to qualify for certified master automobile technician status?

In an automatic transmission, what part of a torque converter causes the turbine to rotate?

Wheel lugs and nuts usually have ________-hand threads (right/left).

The ________ ________ keeps the suspension from continuing to bounce after spring compression and extension.

A ________ ________ is a foot-operated hydraulic piston-type pump that develops pressure for the brake system.

A bolt that is threaded into a part other than a nut may also be called a ________ ________.

In a rear-wheel drive vehicle, another name for the drive shaft is the ________ shaft.

True or False: the drop-center style of wheel is most common on passenger vehicles.

The most popular type of steering system on today's vehicles is ________ and ________.

A ________ valve is a single unit that functions as a brake warning light switch, a metering valve, and/or a proportioning valve.

The air conditioner is considered to be part of the vehicle's ________ system(s).

A transmission and differential contained in a single case on a front-wheel drive vehicle is known as a ________.

A wheel with a ________ ________ has small ridges to hold the tire bead in place if a blowout occurs.

Tires, wheels, and axle housings make up the major portion of a vehicle's ________ (sprung/un-sprung) weight.

In a longitudinally split brake system, one master cylinder piston operates the ________ wheel brake assemblies and the other operates the ________ brake assemblies.

A rubber-like gasket-forming material that is used on flexible flanges is called ______ sealer.