A 48v DC source needed for some microphones

This software is commonly used for streaming events and meetings

Adapters such as HDMI to USB-C can be found in this location

AV tech building should complete this at the end of every shift

A standard 3.5mm audio cable

The type of speaker that outputs low frequency (bass) audio

A three-legged device that mounts cameras

Here, you can find lights and trusses

A software used to display all scheduled events of the day

A connector used for lights

A setting that should be turned down or off before disconnecting and connecting audio devices to avoid popping

'RGBWA' refers to this assortment of values that control a light hue

The storage location for the AV Laptops

These 3 items are essential to the Student Union uniform, and should be worn at all times while on shift

These connectors carry a digital video signal, similar to HDMI

The cause of popping when a signal has too much gain

This lighting is not 'static', it will change

The area where you can make a Cat5 cable if needed

These rooms should be checked at the end of every closing shift, regardless of use that day

A connector used for balance audio, usually plugged into our wired microphones

The process of adjusting the volume levels of specific frequencies in an audio signal

The opening of a lens's diaphragm through which light passes

Questions regarding payroll and uniforms can be answered in this area outside of the AV areas

This simple yet daunting task must be completed at the beginning of every large event

This cable plugs into the orange plate for internet, and yellow for Point to Point