Margin of Safety

Free Space

Always keep your hand at least ______ inches from the blade.

Always wear approved _______ to protect you eyes.

Never cut any material shorter than ___ inches.

Safety device used when ripping stock.

Free Space

Be sure to NOT stand on the _____ side of the machine?

Be sure that the _____, index head, footstock, or fixture is fastened tightly to the table.

Do not cut "_____ hand".

Used when crosscutting stock.

____ % of the wheel diameter must be covered by a guard.

Free Space.

Use a soft-head hammer or _____ hammer to seat the workpiece in a vise.

Do not take your hand away from the trigger switch and handle until the blade is ___________.

Extremely dangerous practice that does not use a ripping fence or miter gauge.

The work rest must be used and kept adjusted to within ____ in of the wheel?

Be sure to cut through the waste stock when possible rather than ________ your piece with a blade.

Do NOT _______ when the cutter is rotating.

Do not ______. Keep proper footing and balance at all times.

The saw should not be raised above the table more than _________ above the stock.

The adjustable tongue guard on the top side of the grinder must be used and kept within __ in of the wheel?

Free Space

Stop the cutter to remove chips and use a _____ for chip removal.

Do not cut stock that has loose knots, splits, defects or _______.