| Electrical | Concrete / Masonry | Masonry | Theater of Operation | Plumbing |
|---|---|---|---|---|
|
What is the main panel box
The only place where all power can be shut off at once
|
What is the weight of a bag of concrete
Weighs 94 lbs
|
What is 7 5/8 x 7 5/8 x 15 5/8 inches
Actual Dimensions of a CMU
|
What is 1" or smaller; Add 20% (x1.2)
2" or greater; Add 10% (x1.1) Plywood only when told (x1.2)
Calculating for loss factor of lumber
|
What is cast-iron, galvanized steel,
copper and plastic
Types of piping
|
|
What is DC (Batteries, Static + Lightning)
AC (Generator made)
Types of electricity production
|
What are Reinforced, Pre Stressed, Pre Cast, and Lightweight
Types of concrete
|
What is M, S, N and O
Types of Mortar
|
What are Common, Finishing, Scaffolding and Roofing
Types of Nails
|
What is PVC, CPVC and Abs
Types of plastic piping
|
|
What is when to recode with black tape
Neutral wire used as hot
|
What is low tensile strength, expands and contracts, shrinks when dry, Heavy
Disadvantages of Concrete
|
What is 16 1/2 inches
Space required for a closure block
|
What are 2d to 8d for sheathing
10d to 60d for framing 6d for gussets 8d for sheathing 16d for framing
Size nails for sheathing and framing
|
What is 12" minimum from wall and 15" from other wall and fixtures
Distance from finished wall to center of flange and from other walls and fixtures
|
|
What is High Compressive strength,
can be cast, molded or shaped Little Maintenance Economical Used Universally Durable Strength can be predetermined
Advantages of Concrete
|
What is Considerable Labor, Time and Material
Planning Saves
|
What is when less than 18" from ground
When to use treated wood
|
What is True vent, Re-vent and Wet vent
Types of Venting
|
|
|
What is 2 screws for single pole, 3 screws for 3-way and 4 screws for 4-way
Description of light switches
|
What is Normal, Modified, High Early, Low Heat, Sulfate Resistant
5 Types of Portland Cement
|
What is Plasticity, Water Retentivity, Strength and Durability
Desirable Properties
|
What is Permanent - 25+ yrs
semi permanent 5-25 yrs temporary up to 5 yrs
Design Life cycles and their time frames
|
What is Ball, Compression, Disk and Cartridge
Types of Faucets
|
Support Us on Ko-fi