| SAFETY | QUALITY | SCANNER FUNCTIONS | PRODUCTIVITY | MISCELLANEOUS |
|---|---|---|---|---|
|
WHAT IS POWER ZONE?
AREA LOCATED BETWEEN THE SHOULDERS & THE MID-THIGH
|
WHAT IS SCANNING OUT OF SEQUENCE?
WHEN THE STEPS TO STOW AN ITEM ARE PERFORMED OUT OF ORDER
|
WHAT IS ASK A PROBLEM SOLVER TO DROP THE CONTAINERS?
(THEN END SESSION)
IF THERE ARE STILL ITEMS REMAINING IN YOUR CONTAINERS THAT YOU CANNOT STOW
|
WHAT IS TIME OFF TASK?
(TOT)
MEASURES THE AMOUNT OF TIME ASSOCIATES SPEND OUTSIDE OF THEIR DIRECT PATH, SO YOU HAVE TO CONTINUOUSLY STOW ITEMS WITHIN 6 MINUTES OR LESS WITH THE EXCEPTION OF BREAKS
|
WHAT IS
R-RIGHT SIZE BINS O-OVERHANG B-BLOCKING O-OVERSTUFF T-TITLES/ASINS FACING OUT S-SIMILAR/SAME ASINS
ACRONYM FOR BIN ETIQUETTE
(LEAVING BINS BETTER THAN YOU FOUND THEM) |
|
WHEN IS NEVER?
THE TIME YOU PUSH A CART WITH A SCANNER IN YOUR HAND
|
WHAT IS SHORTAGE?
WHEN AN ITEM IS NOT STOWED INTO A BIN PHYSICALLY, BUT IS VIRTUALLY
|
WHAT IS END SESSION?
TIP: YOU CAN ASK A PROBLEM SOLVER TO RESEARCH YOUR CONTAINERS TO VERIFY WHETHER THEY ARE ALSO VIRTUALLY EMPTY
IF THERE ARE NO ITEMS REMAINING IN YOUR CONTAINERS
|
WHAT ARE BREAKS/LUNCH?
GOING TO IT EARLY AND COMING FROM LATE GENERATES TIME OFF TASK
|
WHAT IS BIN COLLISION?
ATTEMPTING TO STOW SAME/SIMILAR ASINS ADJACENT
|
|
WHAT IS TEST THE WEIGHT?
DO PRIOR TO LIFTING A TOTE
|
WHAT IS OVERAGE?
WHEN AN ITEM IS NOT STOWED INTO A BIN VIRTUALLY, BUT IS PHYSICALLY
|
WHAT IS THE TOP RIGHT CORNER OF YOUR SCANNER’S SCREEN?
TIP: ALWAYS MAKE SURE YOU ARE SIGNED INTO THE TOTE YOU ARE TAKING ITEMS FROM
DISPLAYS THE CONTAINER YOU ARE CURRENTLY SIGNED IN TO STOW FROM
|
WHAT IS YOUR CART?
WORKING FAR AWAY FROM IT CREATES A BIGGER GAP BETWEEN SCANS
|
WHAT IS ASIN PRIORITY?
ORDER IN WHICH ASINS ARE TO BE SCANNED
|
|
WHAT IS ROTATE/ALTERNATE?
DO THIS WITH YOUR HANDS WHILE HOLDING YOUR SCANNER TO TAKE STRAIN OFF YOUR WRISTS
|
WHAT IS ONE (1) ITEM?
IF A PACKAGE SAYS
*SOLD AS SET *DO NOT OPEN *PACK OF # *PAIR *#-PACK THAT PACKAGE SHOULD BE STOWED AS |
WHAT IS “T”?
BUTTON THAT EXPANDS THE PRODUCT DESCRIPTION AFTER AN ITEM IS SCANNED
|
WHAT IS RATE?
THE NUMBER OF ITEMS YOU ARE EXPECTED TO PROCESS WITHIN A CERTAIN TIME FRAME
|
WHAT ARE DROPZONES?
1. FLAMMABLE
2. OXIDIZER 3. AEROSOL 4. OXIFLAM PROBLEM SOLVE 5. AEROSOL PROBLEM SOLVE |
|
WHAT IS PAUSE AND SAY YOUR CALL (CORNER/CROSSING?)
TIP: THERE ARE MIRRORS ABOVE THE INTERSECTIONS TO HELP YOU SEE IF SOMEONE IS APPROACHING.
BEFORE PUSHING YOUR CART ACROSS AN AISLE OR AROUND A CORNER
|
WHAT IS STANDARD WORK SEQUENCE FOR STOW?
ALSO KNOWN AS JIB (JOB INSTRUCTION BREAKDOWN)
1. GRAB ITEM
2. INSPECT ITEM 3. SCAN ITEM 4. CHECK SCREEN FOR ACCURACY 5. PLACE ITEM IN BIN, KEEPING YOUR HAND ON THE ITEM UNTIL YOU FINISH STEP 7. 6. SCAN BIN 7. CHECK SCREEN FOR SUCCESS |
WHAT IS READ YOUR SCREEN?
TO PREVENT SCANNING OUT OF SEQUENCE
|
WHAT IS A STEP STOOL?
USE IT FOR BINS OUTSIDE OF YOUR POWER ZONE
|
WHAT IS MACHINE GUN STOWING?
(SHOTGUNNING)
GETTING AHEAD OF YOUR SCANNER AND NOT CONFIRMING EACH STOW ONCE YOU HAVE SCANNED THE BIN
|
Support Us on Ko-fi